WRAP SHORTS. ...FREE TUTORIAL

Today I am sharing a textbook:

Faux Wrap pants for girls (or women)

FIRST trace

CURRENT SHORTS,

TO MAKE YOUR SAMPLE. 

Tracing Tips:

1. Turn your shorts inside out.
2. Ironed them or stretch.
3. Make sure your stitches on the edges and
4. thread the other parts of the intra-
5. so easy to follow.
6. Make sure the bottom part and
7. from the crotch upwards curve,
8. and then do a straight up. 
9. Elastic shorts pulled on top,
10. but you need to cut your fabric,
11. like elastic in them yet. 
12. (See photo below)

Add seam allowances and hem.

 For this model, I use 1 "(inch = 2.5 cm)

hem allowance and a 5/8 "seam allowance. 

Take 3/4 "at the top,

because you will do a separate belt.

Note: I took an inch from the front pattern and

added an inch on the back, because I

made flat front waistband.

Make artificial wrap template:

1. Make a rectangle the width of the front short
2. (Measurement of the front part of the template,
3. subtract inside allowance and double).
4. To subtract the length of 1.75 "at the bottom and 1.5" from the side,
5. to make room for frills. 
6. Make a curved line as shown in the photo.

Cut 2 front, 2 back,

1 Wrap a piece of artificial,

1 piece of frills

1 front waist portion and a rear waist 1 piece.

 Waistband is the length of the finished back

and the front panel 3.25 ". 

Frills piece of 3.25 x 40 ".

Right sides together, sew the front to

and back to back on a curved crotch.

Hem the back of the left leg and the right leg forward.

 Iron up to 1/4 ", and then 3/4" and top stitch.

Make frills:

Fold the fabric in half ruffle,

wrong sides together.

Use a basting (longest)

Stitch along the edge of the unfinished

and gently pull the bobbin thread to gather. 

Gather is not the length of your ruffle

the lower edge of a piece of artificial wrap.

Sew it then finish the hem with

detonation or scissors Serger.

 Iron the hem up, then topstitch.

Baste artificial wrapping part

the front of the pant on top.

Ruffle must match evenly

at the bottom with a hem on the shorts.

Sew the belt in the upper part of the front and rear parts,

Right sides together.

Then fold over and the iron belt twice. 

Iron seam towards the top and

Fold the top of the belt

under 1/4 "and iron. Do not sew closed yet.

Stack Shorts front and back right sides together

(Artificial wrap between them). 

Cut 3/4 "length of elastic waist child

minus the width of the front panel.

 Attach elastic waistband with side seams

with a zigzag stitch. 

Sew side seams and waistband pant.

Put the belt on, the elastic trapping

inside the housing bottom. 

Contact and top stitch making

do not sew more elastic.

Sew up the inner seam.

Finish the hem on the unfinished legs. 

Then sew the seam right foot down. 

See photo below.

You made!